7-13REAR WHEEL, BRAKE DISC, AND REAR WHEELSPROCKET CHAS150 Nm (15.0 mkg)27 Nm (2.7 mkg)WARNINGNOTE:EAS00571INSTALLING THE REAR WHEEL1. Lubricate: wheel axle wheel bearings oil seal lipsRecommended lubricantLithium soap base grease2. Install: rear wheel brake caliper bracket adjusting blocks wheel axle washer wheel axle nut brake caliper3. Adjust: drive chain slack aDrive chain slack40 50 mmRefer to “ADJUSTING THE DRIVE CHAINSLACK” in chapter 3.4. Tighten: wheel axle nut brake caliper boltsMake sure that the brake hose is routedproperly.EAS00575ADJUSTING THE REAR WHEEL STATICBALANCE After replacing the tire, wheel or both, the rearwheel static balance should be adjusted. Adjust the rear wheel static balance with thebrake disc and rear wheel drive hub installed.1. Adjust: rear wheel static balanceRefer to “FRONT WHEEL”.
