8-25STARTER MOTOR ELECNOTE:5 Nm (0.5 mkg)NOTE:5. Measure: brush length aOut of specification Replace the brushesas a set.Min. brush length3.5 mm6. Measure: brush spring forceOut of specification Replace the brushsprings as a set.Brush spring force7.16 9.52 N (7.16 9.52 gf)7. Check: gear teethDamage/wear Replace the gear.8. Check: bearing oil sealDamage/wear Replace the defectivepart(-s).EB803701ASSEMBLING THE STARTER MOTOR1. Install: brush seat 1Align the tab a on the starter motor rear coverwith the slot b in the yoke.2. Install: starter motor yoke 1 O-rings 2 New starter motor front cover 3 starter motor rear cover 4 boltsAlign the match marks a on the starter motoryoke with the match marks b on the front andrear covers.
