2-39P Insert the projection of the band (wireharness) intothe hole of the frame.Q 1: Speed sensor connector2: AC magneto connector3: Sidestand switch connector4: Oil level switch connector5: Meter ground leadR Fasten the leads (above 1 – 5) and starter motorlead with a steel band on the engine.S Route the fuel tank breather hose and fuel tankdrain hose over the wireharness.T Route the starter cable with slot of the heat protec-tion plate.CABLE ROUTING SPECU Route the starter cable and wireharness throughthe guide of the heat protection plate.V Route the fan motor lead under the throttle cableand then, fasten the fan motor lead and throttlecable with a band.W To radiator fan motor
