Yamaha YZF-R6 Service Manual

Also see for 1999 YZF-R6: Service manual

Contents

8-41SIGNALING SYSTEM ELECReplace the meterassembly.NOYESThe wiring circuitfrom the turn signalswitch to the turn sig-nal light connector isfaulty and must be re-paired.NOThis circuit is OK.EB8064144. The neutral indicator light fails to come on.1. Neutral indicator light LED Check the LED of the neutral indicator light.Refer to “CHECKING THE LEDs”. Is the neutral indicator light LED OK?YES Set the main switch to “ON”. Set the turn signal switch to “ ” or “ ”. Measure the voltage (12 V) of chocolate ordark green at the turn signal light connec-tor (wire harness side). Is the voltage within specification?3. Voltage Connect the pocket tester (DC 20 V) to themeter assembly coupler (wire harness side)as shown.Tester positive probe brownTester negative probe sky blue1212Replace the neutralswitch.NO2. Neutral switch Check the neutral switch for continuity.Refer to “CHECKING THE SWITCHES”. Is the neutral switch OK?YES Set the main switch to “ON”. Measure the voltage (12 V) of brown andsky blue at the meter assembly coupler. Is the voltage within specification?12YESThe wiring circuitfrom the main switchto the meter light bulbcoupler is faulty andmust be repaired.NOThis circuit is OK.Replace the meterassembly.NOEB8064165. The oil level warning light fails to come on.1. Oil level warning light LED Check the LED of the oil level warning light.Refer to “CHECKING THE LEDs”. Is the oil level warning light LED OK?YES