Axio Vert.A1 Table of Contents / List of Figures Carl Zeiss05/2012 431030-7044-001 7Fig. 4-8 Setting DIC....................................................................................................................... 81Fig. 4-9 Setting Relief Orientation on the iHMC ............................................................................. 83Fig. 4-10 Centering Screws ............................................................................................................. 84Fig. 4-11 Aligning of the Objective Zone Plate and the iHM Diaphragm ............................................ 85Fig. 4-12 Setting Bright Field ........................................................................................................... 86Fig. 4-13 Setting the Polarization ..................................................................................................... 86Fig. 4-14 Setting Bright Field ........................................................................................................... 88Fig. 4-15 Setting DIC/C-DIC............................................................................................................. 90Fig. 4-16 Setting the Polarization ..................................................................................................... 93Fig. 4-17 Setting Fluorescence ......................................................................................................... 95Fig. 4-18 Screw-on Options for Micromanipulators .......................................................................... 96Fig. 5-1 Replacing Fuses ................................................................................................................ 98NOTEThe figures integrated into the text bear numbers and captions. "Fig. 2-8", for instance, means the figurein Section 2 identified by consecutive number 8. Details discussed in the text are marked with a referenceslash and a location number. In running text, "eyepiece tube (Fig. 2–8/4)" means that the eyepiece tubeis marked by location number 4 in Fig. 8 of Section 2.Please refer to the Annex for an explanation of the abbreviations used.
