OPERATIONAxio Vert.A1 Illumination and Contrast Techniques in Reflected Light Carl Zeiss05/2012 431030-7044-001 93Setting Polarization with the Pol P&CReflector Module and Analyzer Slider A12x35 mm, Rotatable 90 Degrees• Set up the microscope for bright field inreflected light.• Rotate in the Pol P&C reflector module on thereflector turret.• Insert the analyzer slider (Fig. 4-16/2) into theslot (Fig. 4-16/1) under the reflector turret. Theanalyzer can be rotated 90 degrees.• Use the analyzer turning lever to cross thevibration direction of the analyzer and polarizer(Fig. 4-16/4) (dark position).• The analyzer slider may be inserted both fromthe left-hand and right-hand sides.For the purpose of color-contrasting anisotropic materials, compensator Lambda Pol sub.±10° (Fig. 4-16/3) may be used in addition to compensator Lambda. To do so, place thecompensator on the analyzer.Setting Polarization with Analyzer Slider A 12x35 mm, Rotatable 90 Degrees, and PolarizerSlider A 6x30 mm• Set up the microscope for reflected light bright field.• Insert the analyzer slider into the opening under the reflector turret. The analyzer can be rotated 90degrees.• Insert the polarizer slider into the opening beside the luminous field diaphragm. The polarizer can berotated 90 degrees.• Cross the vibration direction of the analyzer and polarizer.Fig. 4-16 Setting the Polarization
