IOLMaster 700 Parts Removal Replacement3.2.6 Lens Drive (PCB & Cable)Precondition: Shut down and switch off the instrument The measurement head side covers have been removed from the IOLMaster 700.See section 3.2.1, page 3 The side or top dust cover has been removed. See section 3.2.5, page 10.Procedure:Caution!When disconnecting the connectors becareful to not accidentallydamage/remove the socket.1) Disconnect the connector at main controlPCB.2) Remove four screws (Torx 8) on the fixationpoints.Fig. 24 - Lens Drive PCB OverviewReassembly:1) Reassemble in the reverse order.2) Perform a system checkout in accordancewith the instrument checklist.Fig. 25 - Lens Drive PCBScrewsSM-30-4060 Confidential and Proprietary Service ManualVersion 03, 2014-10-13 3 - 11 Order No. 2075-325

Zeiss IOLMaster 700 Service Manual