Zeiss IOLMaster 700 Service Manual

IOLMaster ® 700 General Information1.4 IOLMaster® 700 Service StrategyThe service strategy for IOLMaster® 700 envisages that field service must only be performed byappropriately trained technicians authorized by ZEISS. These activities are described in this servicemanual and are dealt with in detail during the service training for this product.Only original spare parts must be used.For maintenance and repair adequate ESD protection measures must be taken. Only tools specified inthe tools list must be used (see section 7).1.4.1 General Safety InstructionsIf you need to gain access to the interior electronics of the IOLMaster® 700, especially the computerbase, always disconnect the instrument from any and all power sources first.For maintenance and repair adequate ESD protection measures must be taken. Only tools specified inthe tools list may be used (see section 7).Only original spare parts listed in section 7 and the official CZM spare part price list must be used.Do not use or install software which is not approved and tested by CZM. Other procedures thandescribed in this manual are not allowed to be performed by the field service engineer.After any kind of manipulation or changes perform a System Checkout in accordance with theinstrument checklist and initiate a technical safety check according to section 2, especially after theservice of electronic parts directly connected to the main power, e.g. power supply, main switch andpower entry module.1.4.2 Laser ClassBased on the IEC 60825-1 laser class specification the following laser classes can be found within theIOLMaster® 700.Class 1Normal Use with Measurement Head covers in placeClass 1MService Activity with Measurement Head covers removed.WARNING RISK OF OPTICAL RADIATIONOnce the Glass Fiber is disconnected, do not look directly or via any optical tool, suchas mirrors, magnification lenses or microscopes into the Laser, in order to preventpotential damage to the Eye.SM-30-4060 Confidential and Proprietary Service ManualVersion 03, 2014-10-13 1 - 5 Order No. 2075-325