Zeiss IOLMaster 700 Service Manual

IOLMaster 700 Troubleshooting Error Codes5.2.3 DAQ Board Error CodesError code Error description Error correction3000Live OCT scan background scan wasaborted3001 Measurement OCT scan was aborted3002 An unexpected error was thrown.3003 The DAQ board is not initialized.3004 The DAQ board is already initialized.3005DAQ board is actually running inacquisition mode.3006 The thread is already running.3007 The acquisition is stopped.3008 Invalid parameter detected.3009 Invalid configuration detected.3010 Open of DAQ library failed.3011 Read of DAQ library failed.3012 Load of DAQ library failed.3013 A thread queue is empty.3014 Invalid item detected.3015 Wait timeout is reached.3016 A thread is aborted.3017 Invalid API version detected.3018 Invalid Windows driver version detected.3019 Invalid Kernel driver version detected.3020 Invalid DAQ baord logic ID detected.3021Invalid DAQ baord logic versiondetected.3022Invalid DAQ board hardware versiondetected.3023 Failure in thread detected.3024 A windows error was detected.3025 Out of memory detected.3026 Open low level driver failed.3027 The driver is already open.3028 Close low level driver failed.3029 Configuration of driver failed.3030 A driver operation failed.3031 A driver device error detected.3032 Driver found no device.3033 The DMA buffer is in use.3034 The DMA buffer is already released.3035 The DMA buffer is rejected.3036 The driver resource is not allocated.3037 A unknown driver error detected.3038 A unknown error was detected.SM-30-4060 Confidential and Proprietary Service ManualVersion 03, 2014-10-13 5 - 7 Order No. 2075-325