3Com VCX Manual

Also see for VCX: Quick reference guide Guide Guide Installation and configuration guide

Contents

3Com VCX Manual Manual pdf 28 page image

You cannot use this feature with external calls (a call from outside your local callprocessor) or Anonymous (blocked caller ID) calls. These calls ring to your telephoneas usual.If your telephone is part of a bridged extension, see Hands Free and Bridged LineCalls for additional information..Youcan enable or disable the Hands Free feature by using Feature Code 100. SeeFeature Codes.Putting a Call on HoldTo put a call on hold:1) While you are on a call, press the Hold button. This message appears in theDisplay Panel: Hold2) To return to the call, press the Hold button again or press the appropriate Accessbutton.Music on HoldIf configured by the administrator, callers on hold hear music while they wait.The VCX system’s WAV file importing capabilities are solely an accommodation toyou and shall not constitute a grant or waiver (or other limitation or implication) of anyrights of the copyright owners in any audio content, sound recording or underlyingmusical or literary composition. Therefore, please be mindful that you are obligated tocomply with all applicable copyright and other intellectual property laws in bothuploading WAV files to the VCX system and your subsequent use of such WAV files.Dialing a New Call While on a CallYou can put a call on hold, dial a new call, and toggle between the two calls:1) Press the Hold button.2) Press one of the Access buttons not currently being used.3) When you hear dial tone, dial the second call.Answering a New Call While on a CallYou can put your current call on hold, answer a second call, and then toggle betweenthe two calls:1) When a new call arrives, press the Hold button to put the current call on hold.2) Press the Access button for the incoming call (its light will be flashing).3) To toggle between the two calls, put the current call on hold and then press theAccess button for the call you want to resume.