Enter the phone number:Press # to complete!3Enter the extension of the private call and press #.Alternatively you can combine steps 2 and 3 by using the following single commandafter picking up the handset:*429*For <extension>, you can either enter the private telephone extension or press a speeddial button mapped to that extension.Remote Call ForwardThe Remote Call Forward feature allows you to configure the forwarding options of atelephone from another telephone in the network. This is useful if, for example, person Ais on vacation and all of person A’s calls must be forwarded to person B. This featureenables person B to configure Call Forward Universal on the source telephone (personA). Note that person A can be at one site and person B can be at a different site.The VCX administrator must authorize use of the Remote Call Forward feature. Theadministrator can authorize you to remotely change the call forward options on onetelephone or all the phones in the network. For example, if the administrator authorizesyou to change only person A’s forwarding options, you can enter a feature code (468)and redirect person A’s calls to any other extension, including your own.When successfully configured, the remote (destination) phone’s LED (if available) willflash for all forwarded calls, and the LCD will also display a call forward message.To remotely enable a telephone to forward calls to another extension:1)Pick up the handset.2)PressFeature + 468.The Display Panel prompts you to enter the remote telephone number.3)Enter the extension of the telephone whose calls you want to forward and press#.The Display Panel prompts you to enter the extension of the telephone that will receivethe forwarded calls.4)Enter the extension of the telephone that will receive forwarded calls and press#.Alternatively, you can combine steps 2, 3, and 4 by entering the following command:*468**Remote call forwarding can be disabled on any telephone that set up remote callforwarding or on the extension whose calls you no longer want to remotely forward.For example, extension 1001 has used feature code 468 to specify that all of extension1000’s calls be forwarded to extension 1002. You can disable remote call forwarding onextension 1000 or 1001:zOn extension 1001:pPressFeature + 468.qEnter the extension whose calls you no longer want to remotely forward (inthis case, 1000) and press #.
