To locate the speed dial number you want to configure, press the speed dial number (1through 9) or use the up and down scroll buttonsIf you assign a number to a speed dial that does not have a corresponding Accessbutton, you can speed dial the number only by entering the appropriate feature code.3) Press the # button, then enter the number you want to associate with this speeddial. Include all prefix numbers that you would normally dial, such as a 9 or 8 or 1 to access anoutside line, and, if necessary, the country code or area code.4) To store the number, press the # button.Make sure you write the name of the person whose number you have stored and thecorresponding Speed Dial Access button or feature code.Alternately, you can configure personal speed dial numbers by following these steps:5) Press the SA line button.6) Enter *601* + + * + .7) Press the # button to store the number.Example: SA button + *601*2*12345 + #Editing Personal Speed Dial NumbersYou can change or delete any personal speed dial number that you previouslyconfigured using the Telephone User Interface.To change or delete a previously configured speed dial number:1) Press the Program button. The Main menu appears.2) Press [3] to access the Speed Dial menu.The Display Panel shows the configured number, for example:1:1001To locate the speed dial number you want to change or delete, press the speed dialnumber (1 through 9) or use the up and down scroll buttons3) To change or delete an existing speed dial number, press the # key and then usethe second soft button to delete each digit.4) To store the number, press the # button.Dialing Personal Speed Dial NumbersThe method you use to dial a configured speed dial number depends on your telephoneand whether or not the number is mapped to a speed dial Access button.To dial a number configured as a speed dial on a VCX telephone with one or morespeed dial Access buttons, press the appropriate button. If the number is not associatedwith a button, use the next procedure.To dial a configured speed dial number on any VCX phone: