PYRO A/V LINK 14ENGLISHWINDOWS – Quick Start1.) Connect A/C Power adapter2.) Connect the 6 Pin 1394 cable between the PYRO A/V Link and computer.Connect directly to the 1394 Host port. Connecting through a 1394 Hub/Repeater is not recommended.3.) WinXP and Win2000 will automatically recognize the device and installdrivers. WinME and Win98SE may ask for drivers from the Windows CD.4.) Once the device drivers are installed the PYRO A/V Link will appear underWindows Device manager as an Imaging Device.5.) Connect Audio/Video cables between your video devices andPYRO A/V Link6.) Start your Video Editor application and you are ready to capture video7.) Press Play on your video device.8.) Press the Play button on your video editor’s preview window to beginpreviewing video. Press Record, or Capture button to begin recording toyour computer hard drive.Hardware Installation:Windows Software:The drivers necessary for the PYRO A/V Link to operate with a Windows basedPC are built into the operating system. Once you plug in the device, Windows willrecognize it and the device will appear as an imaging device in Device Manager.If you already own video editing software such as Adobe Premiere, you are readyto connect your video devices and start capturing video.For Windows Users who don’t have any video editing software, we provide a CDthat includes Ulead’s VideoStudio software. This software allows you to capture,edit, export video, save as MPEG-1, MPEG-2, streaming video or even burn aVCD, SVCD or DVD disk.
