PYRO A/V LINK 27ENGLISHAdd a Preview Monitor to this ConfigurationYou can easily connect a TV to the audio video output jacks on the PYRO A/VLink to monitor your video dubbing process.1.) Connect an RCA or S-VHS video cable between the PYRO A/V Link andyour TV RCA or S-VHS Video input jacks.2.) Connect Right and Left audio cable between the PYRO A/V Link Right andLeft audio jacks and your TV audio inputs.3.) Switch the TV to accept an external video input.Connecting for Digital toAnalog ConversionIf you have a digital camcorder you can use the PYRO A/V Link to convert thedigital content into an analog video signal so it can be recorded on your VCR.1.) Connect your digital camcorder or DV deck to the 4 pin DV In jack on thefront of the PYRO A/V Link.2.) Connect a video cable from the RCA or S-VHS OUT jacks on the back ofthe PYRO A/V Link and into an external video input (RCA or S-VHS) onyour VCRNote: S-VHS provides a higher quality video recording than an RCAcable. S-VHS is recommended if your camcorder or VCR offers thisconnection.3.) Connect an audio cable to the Left and Right RCA audio OUT jacks onthe back of the PYRO A/V Link to the external audio inputs (RCA) on yourVCR.Note: If you are recording back to a camcorder, you may need to usethe cables provide by the camcorder manufacturer.
