PYRO A/V LINK 28ENGLISH4.) Use the MODE SELECTOR SWITCH on the front of the PYRO A/V Linkdevice to switch to DIGITAL MODE. In this mode, the BLUE LED shouldbe lit.5.) Apply Power to the VCR and press RECORD just before you press PLAYon your digital camcorder.Add a Preview Monitor to this ConfigurationYou can preview and record video to a VCR at the same time as long as the VCRallows for audio and video to be passed through it. Check and test your VCR toensure that it has audio and video inputs and outputs and they allow pass throughof audio and video while recording.1.) Connect a video cable from the RCA or S-VHS OUT jacks on the back ofthe PYRO A/V Link and into the Video In on your VCR.2.) Connect an RCA or S-VHS cable to the Video Out on your VCR to anexternal video input (RCA or S-VHS) on your TV.3.) Connect an audio cable to the Left and Right RCA audio OUT jacks on theback of the PYRO A/V Link to the audio inputs (RCA) on your VCR.4.) Connect an audio cable between the Left and Right RCA OUT on yourVCR to the Audio INPUTS on your TV.5.) Apply Power to the VCR – You may have to change the TV/VCR switch onthe VCR to allow pass through.6.) Apply Power to the TV and switch the TV to accept the external videosource. (Check your TV manual if you are not sure how to do this.)
