PYRO A/V LINK 34ENGLISHConfiguring VideoStudioPYRO A/V Link allows you to capture video from camcorders, VCRs, andVCD/DVD Players into the high-quality DV format. To ensure a smoothinstallation and setup with VideoStudio 7, please follow the steps outlinedbelow.Check that your device is listed under Source1.) Turn on your PYRO A/V Link and becertain that it has been properly detectedby the Windows Device manager asoutlined on the previous pages.2.) Connect your video source to the audioand video jacks on A/V Link.3.) Check your video source to ensure it ispowered on and that you have a tape ofdisk playing video.4.) Click the Capture Step at the top of theVideoStudio program. You should see“PYRO A/V Link” listed in the Source fieldin the Capture Settings panel.5.) DV should be the video capture format. Ifyou wish to capture as MPEG video, readthe section on “Direct Capture of MPEG”later in this manual.6.) Click on File.7.) Then click “Change Capture Plug-in” – Besure that Ulead Direct Show CapturePlug-in is selected8.) Click PLAY on the Preview Window andyou will see your video previewing.Note: PYRO A/V Link supports many video input sources. PYRO A/V Link has the ability toautomatically sense and select the active video input whether it be Composite (RCA), SVideo(S-VHS) or Component video inputs. Video will be captured from what ever video source isconnected with a live video signal.
