PYRO A/V LINK 25ENGLISH2.) Connect an audio cable to the Left and Right RCA audio OUT jacks onthe back of the PYRO A/V Link to the external audio inputs (RCA)on your VCR.Note: If you are recording back to a camcorder, you may need to usethe cables provide by the camcorder manufacturer.3.) Apply Power to the VCR and press RECORD just before you beginexporting video from your computers video editing software.Note: Each video editing software program will offer a slightly different method forexporting video. Some software will allow export from timeline without renderingthe video and others will require that you “Save” your video and then “Print toTape”. Please check the user guide for your video editing software to learn howto export video.Exporting to a Digital CamcorderIf you want to export from your video editor to a digital camcorder, you canaccomplish this by connecting the camcorder directly to the 1394 port. However,you can also use the PYRO A/V Link as your 1394 connection and export DVthrough the A/V Link and into your digital camcorder.The setup is the same as if you used A/V Link as your Digital camcordercapture connection.1.) Connect a 4 pin to 4 pin DV cable between the DV In/Out connection onyour digital camcorder to the 4 Pin DV In/Out port on the PYRO A/V Link.2.) Turn your Camcorder on to VCR/VTR mode.3.) The Digital Camcorder will be recognized by the computer.4.) Start your Video Editing software, Use the export or Print to Tape functionin the software to export video from your computer and record in thedigital camcorder.
