AEG 940321349 User Manual

Also see for EEB355020M: User manual User manual

7.2 How to set: Clock functionsHow to change: Time of Day- flashes when you connect the oven to the electrical supply, when there was a powercut or when the timer is not set.Step 1 - press repeatedly. - starts to flash.Step 2 , - press to set the time.After approximately 5 sec., the flashing stops and the display shows the time.- press repeatedly to change the time of day. - starts to flash.How to set: DurationStep 1 Set an oven function and the temperature.Step 2 - press repeatedly. - starts to flash.Step 3 , - press to set the duration.The display shows: .- flashes when the set time ends. The signal sounds and the oven turnsoff.Step 4 Press any button to stop the signal.Step 5 Turn the knobs to the off position.How to set: Minute MinderStep 1 - press repeatedly. - starts to flash.Step 2 , - press to set the time.The function starts automatically after 5 sec.When the set time ends, the signal sounds.Step 3 Press any button to stop the signal.Step 4 Turn the knobs to the off position.How to cancel: Clock functionsStep 1 - press repeatedly until the clock function symbol starts to flash.Step 2 Press and hold: .The clock function turns off after few seconds.www.aeg.com12