• WARNING: The appliance and its accessible partsbecome hot during use. Care should be taken to avoidtouching heating elements.• Always use oven gloves to remove or put inaccessories or ovenware.• Before carrying out any maintenance, disconnect theappliance from the power supply.• WARNING: Ensure that the appliance is switched offbefore replacing the lamp to avoid the possibility ofelectric shock.• Do not use the appliance before installing it in thebuilt-in structure.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metalscrapers to clean the glass door since they canscratch the surface, which may result in shattering ofthe glass.• If the mains power supply cable is damaged, it mustbe replaced by the manufacturer, its AuthorisedService Centre or similarly qualified persons to avoidan electrical hazard.• To remove the shelf supports first pull the front of theshelf support and then the rear end away from theside walls. Install the shelf supports in the oppositesequence.• The means for disconnection must be incorporated inthe fixed wiring in accordance with the wiring rules.2. SAFETY INSTRUCTIONS2.1 InstallationWARNING!Only a qualified person mustinstall this appliance.• Remove all the packaging.• Do not install or use a damagedappliance.• Follow the installation instructionssupplied with the appliance.• Always take care when moving theappliance as it is heavy. Always usesafety gloves and enclosed footwear.• Do not pull the appliance by thehandle.• Install the appliance in a safe andsuitable place that meets installationrequirements.• The kitchen cabinet and the recessmust have suitable dimensions.• Keep the minimum distance fromother appliances and units.www.aeg.com4