Step 1 Turn off the oven and wait un‐til it is cold.Step 2 Pull the front of the shelf sup‐port away from the side wall.Step 3 Pull the rear end of the shelfsupport away from the sidewall and remove it.21Step 4 Install the shelf supports inthe opposite sequence.11.4 How to use: AquaCleaningThis cleaning procedure uses humidity tohelp remove remaining fat and foodparticles from the oven.Step 1 Pour water into the cavity em‐bossment: 200 ml.Step 2 Set the function: .Step 3 Set the temperature to 90 °C.Step 4 Let the oven work for 30 min.Step 5 Turn off the oven.Step 6 Wait until the oven is cold. Drythe cavity with a soft cloth.11.5 How to remove: GrillWARNING!There is a risk of burns.Step 1 Turn off the oven and wait untilit is cold to clean it.Remove the shelf supports.Step 2 Grab the grill corners. Pull it for‐wards against the spring pres‐sure and out of two holders.The grill folds down.Step 3 Clean the oven ceiling withwarm water, a soft cloth and amild detergent. Let it dry.Step 4 Install the grill in the oppositesequence.Step 5 Install the shelf supports.www.aeg.com30