11.7 How to replace: LampWARNING!Risk of electric shock.The lamp can be hot.Before you replace the lamp:Step 1 Step 2 Step 3Turn off the oven. Wait untilthe oven is cold.Disconnect the oven fromthe mains.Put a cloth on the bottom ofthe cavity.Top lampStep 1 Turn the glass cover to removeit.Step 2 Clean the glass cover.Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.Step 4 Install the glass cover.12. TROUBLESHOOTINGWARNING!Refer to Safety chapters.12.1 What to do if...In any cases not included in this tableplease contact with an AuthorisedService Centre.Problem Check if...The oven does notheat up.The fuse is blown.The display shows"12.00".There was a powercut. Set the time ofday.The water leaks outof the cavity em‐bossment.There is too muchwater in the cavityembossment.Problem Check if...Unsatisfying cook‐ing performance ofthe function: TrueFan CookingPLUS .You filled the cavityembossment withwater.The lamp does notwork.The lamp is burntout.12.2 Service dataIf you cannot find a solution to theproblem yourself, contact your dealer oran Authorised Service Centre.The necessary data for the servicecentre is on the rating plate. The ratingplate is on the front frame of the ovenwww.aeg.com32