AEG 940321349 User Manual

Also see for EEB355020M: User manual User manual

• Before mounting the appliance, checkif the oven door opens withoutrestraint.• Parts of the appliance carry current.Close the appliance with furniture toprevent touching the dangerous parts.• The appliance is equipped with anelectric cooling system. It must beoperated with the electric powersupply.• The built-in unit must meet thestability requirements of DIN 68930.Cabinet minimumheight (Cabinet underthe worktop minimumheight)578 (600) mmCabinet width 560 mmCabinet depth 550 (550) mmHeight of the front ofthe appliance594 mmHeight of the back ofthe appliance576 mmWidth of the front ofthe appliance595 mmWidth of the back ofthe appliance559 mmDepth of the appli‐ance567 mmBuilt in depth of theappliance546 mmDepth with open door 1027 mmVentilation openingminimum size. Open‐ing placed on the bot‐tom rear side560 x 20 mmMounting screws 4 x 25 mm2.2 Electrical connectionWARNING!Risk of fire and electricshock.• All electrical connections should bemade by a qualified electrician.• The appliance must be earthed.• Make sure that the parameters on therating plate are compatible with theelectrical ratings of the mains powersupply.• Always use a correctly installedshockproof socket.• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage tothe mains plug and to the mainscable. Should the mains cable need tobe replaced, this must be carried outby our Authorised Service Centre.• Do not let mains cables touch orcome near the appliance door or theniche below the appliance, especiallywhen it operates or the door is hot.• The shock protection of live andinsulated parts must be fastened insuch a way that it cannot be removedwithout tools.• Connect the mains plug to the mainssocket only at the end of theinstallation. Make sure that there isaccess to the mains plug after theinstallation.• If the mains socket is loose, do notconnect the mains plug.• Do not pull the mains cable todisconnect the appliance. Always pullthe mains plug.• Use only correct isolation devices: lineprotecting cut-outs, fuses (screw typefuses removed from the holder), earthleakage trips and contactors.• The electrical installation must havean isolation device which lets youdisconnect the appliance from themains at all poles. The isolationdevice must have a contact openingwidth of minimum 3 mm.• This appliance is supplied without amain plug and a main cable.2.3 UseWARNING!Risk of injury, burns andelectric shock or explosion.• This appliance is for household useonly.• Do not change the specification of thisappliance.• Make sure that the ventilationopenings are not blocked.ENGLISH 5