3-18Adaptec RAID Installation Guide13 If your system contains multiple Adaptec RAID controllers,repeat Steps 6 through 12 for each Adaptec RAID controller.14 Restart the system and then open the Device Manager. Itshould now show an Adaptec I 2O RAID Host Adapter in theSCSI and RAID Controllers section.Upgrading Windows 95 to Windows 98/Me (Upgrade Version)If you are upgrading the system from Windows 95 toWindows 98/Me in an existing system that already has afunctioning Adaptec RAID controller, no further configuration isnecessary. Perform the Windows upgrade; the functionality of theAdaptec RAID controller is retained.If the controller is being added in addition to the upgrade, follow theprocedure in Installing the Driver in a New Windows 98/Me System onpage 3-12.Novell NetWareThe Adaptec RAID Installation CD contains device drivers forNetWare 4.11, 4.2, and 5.x. The following Novell support packs arethe minimum level required before installing Adaptec RAIDcontroller software and drivers:After you have installed the drivers, you can use the normalNetWare procedures for modifying disk partitions, applying hotfixes, or performing volume maintenance.NetWare Revision Level Support Pack4.11 or 4.2 8a5.0 55.1 1
