4-9Installing Storage Management SoftwareConfiguring the Controller Cache in Windows NT and Windows 2000If you are using Windows NT 4.0 or Windows 2000, perform thefollowing tasks after you install Storage Manager to ensureoptimum data cache performance:1 Start Storage Manager and double-click on the controller iconto display the Host Bus Adapter Info window.2 Select Configure to display the Configure Host Bus Adapter(HBA) window.3 Select Caching. When the HBA Caching Configuration dialogbox appears, click Advisory for both settings.4 Select OK to exit the dialog and save the changes.5 Restart your computer so that changes take effect.NetWareAs a prerequisite for installing Storage Manager on NetWare, yournetwork must include at least one client workstation that supportsStorage Manager. Therefore, in addition to installing StorageManager on your server, you must also install Storage Manager on aclient workstation. You manage your RAID from the client.To install Storage manager for NetWare1 Mount the CD. For NetWare 5, refer to the Novell documentation.For NetWare 4.11 or 4.2, typecd mount adaptecraid_v1 /x=usr2 Typeadaptecraid_v1\package\netware\5.x\apps\sm\dptinst.nlmYou are prompted to select whether to load the remotecommunication support immediately or delay loading untilthe server is restarted. If you wait until the server restarts, youcannot monitor the RAID from a remote client until the serveris shut down and restarted. If you load remote communicationsupport immediately, the remote communication support isloaded and available as soon as you exit the install program.3 Install Storage Manager on a client workstation. Refer to theappropriate section for details.
