4-3Installing Storage Management SoftwareInstallation PrerequisitesThe prerequisites for installing Storage Manager Pro are that youhave already installed the following: Adaptec RAID controller and drives. Refer to Chapter 2,Installing Your Controller. Controller driver. Refer to Chapter 3, Installing the Driver.Storage Manager Pro requires approximately 60 MB of free diskspace during the installation process. After the installation iscomplete the application uses approximately 20 MB of disk space.Note: If you already have Storage Manager Pro installed onyour computer, you must uninstall it before reinstalling it.To uninstall Storage Manager Pro, refer to the AdaptecStorage Manager Pro User’s Guide.WindowsWhen you install Storage Manager Pro for Windows, youautomatically install Java Runtime Environment (JRE) 1.1.8, which isrequired to run Storage Manager Pro. This does not conflict with anyother version of the JRE or Java Development Kit (JDK) you haveinstalled.Note: Do not install Storage Manager Pro on a network drive,because Storage Manager Pro runs as a Windows NT/2000service and services do not have network access rights.To install Storage Manager Pro on Windows1 If you are using a Windows 2000 or Windows NT system,verify that you have administrator privileges.2 If your Windows system is configured to automatically startCD software, insert the Adaptec RAID Installation CD into yourdrive and when the installation menu appears click InstallAdaptec Storage Manager Pro.
