Cabletron Systems Cyber SWITCH 1000 User Manual

Workgroup Remote Access Switch 13SIMPLE R EMOTE B RIDGING N ETWORKBridging and Routing InformationThe next item that you need to configure is the Data Link for the line. Depending on the switch type,there may be more than one Data Link per line. In our example, we use one Data Link withAutomatic TEI Negotiation:After entering the above information, press to display the line menu. Because there arefour lines in this example, the steps for adding a line should be repeated for lines 2, 3, and 4. Afterall lines have been added, press twice to return to the Main Menu.C ONFIGURING THE O PTIONSThe default configuration for the CyberSWITCH is bridging disabled and IP routing enabled. Forreasons we provide below, we want both bridging and IP routing enabled. Under the Option Menu,select the bridging option and follow the instructions to enable bridging.This network is a bridged network, but we are going to configure an IP option (the IP host operatingmode) so that we may use an IP application (such as Telnet, TFTP, or SNMP) to manage theCyberSWITCH. Refer to the graphic below for clarification.LINE TYPE = BR_ISDN1) POINT_TO_POINT2) POINT_MULTIPOINTSelect Option [default = POINT_TO_POINT] or press for previous menu: 1Current DATA LINK Configuration for this line:id TEI-- ----There are currently no Data Links configured for this line.Enter (1) to Add or press for previous menu: 1Automatic TEI Negotiation (Y or N) [default = Y]? YCurrent Data Link Configuration for this line:id TEI-- ----1 AUTO(1) Add, (2) Change, (3) Delete a DATA LINK or press for previous menu?