Cabletron Systems Cyber SWITCH 1000 User Manual

Workgroup Remote Access Switch 43IP R OUTING N ETWORKConfigure the CyberSWITCHThe following screen will be displayed after all four devices in our example have been entered:Return to the Security Configuration Menu.C ONFIGURING THE U SER L EVEL D ATABASESThis network doesn’t require the use of a user level database. Therefore, no changes are necessary.C ONFIGURING THE O FF - NODE S ERVER I NFORMATIONThe default configuration for Off-node Server Information is None (Use On-node). Since thisnetwork doesn’t require the use of an off-node server, no changes are necessary.C ONFIGURING THE N ETWORK L OGIN I NFORMATIONThis network doesn’t require the use of a user level database so network login informationconfiguration is not necessary.SAVE CONFIGURATION F ILESWe have now configured all the required information for this example. Press 4 from the Main menuto save the changes. The old configuration files will be stored in the \CONFIG directory with a fileextension of .BAK (e.g., the old NODE.NEI file will be called NODE.BAK).After you save the configuration files, press to exit the CFGEDIT program. Reboot thesystem to activate your changes.Current Device Table (Sorted by Device Name in Ascending ASCII Order)id DEVICE NAME-----------------------------1 "Jill Smith"2 "Rick Bear"3 "Todd Jones"4 "Ralph Moose"(1) Add, (2) Change, (3) Delete, (4) Display a Device or press for previousmenu?