Workgroup Remote Access Switch 87IPX ROUTING N ETWORKConfigure IPX Routing: Masternet (Detroit)A DD R EMOTE LAN D EVICESFrom the On-node Device Entries Menu, select Add. Enter the device name for the Tampa site, whichis tampabr. Select Authentication, and add the Tampa site’s PAP password, which is tbpswd. Acceptdefaults for ISDN and IPX information.From the Device Table Menu, select Bridging. Enter the IPX Remote LAN Network Number of 0128,which is the external network number of the Remote LAN at the Tampa site. Be sure make calls fieldis disabled, since Remote LAN does not as yet support this feature.Note: In our example, we could have also accepted the default option for the IPX NetworkNumber, NONE, since the remote LAN has no servers locally attached to it. In this case, theRemote LAN’s network address would default to 0128, the external network number wewill configure for the Remote LAN interface. For more details, refer to the Configuring IPXchapter, Network Interface Background Information.The bridging options for tampabr should now look like the following:The configuration of device tampabr is complete. Return to the On-node Device Entries Menu, andadd the device orlandobr in a similar fashion. After devices tampabr and orlandobr have beenconfigured, return to the Main Menu.CONFIGURE SYSTEM O PTIONSNext, we must configure bridging and routing information, which falls under the Options category.To begin its configuration, press 2 at the Main Menu. For this example, we will enable bridging,enable IPX routing, and configure the necessary IPX routing information.E NABLE B RIDGING1. Select Options from the Main Menu.2. Select Bridging.3. Follow screen prompts to insure that bridging is enabled (to support Remote LAN).E NABLE IPX R OUTING1. Select Options from the Main Menu.Device Bridge Menu: (Device = "tampabr")1) IP (Sub)Network Number NONE2) Bridging ENABLED3) Make calls for bridge data DISABLED4) IPX Remote LAN Network Number 01285) IPX Spoofing Options6) AppleTalk Network NumberEnter selection or press for previous menu: