EXAMPLE NETWORKS88 CyberSWITCH2. Select IPX Routing.3. Enable IPX Routing. Press any key to display the complete IPX routing menu:D EFINE AN I NTERNAL NETWORK NUMBER1. From the IPX menu, select IPX Internal Network Number.2. Enter the Network Number as prompted. For our example, we will assign the Detroit IPXrouter masternet a unique internal network number of 111abc.IPX I NTERFACE I NFORMATIONIn our example, we have three interfaces:• the LAN interface, which represents the CyberSWITCH connection to the LAN IPX Network0100• the Remote LAN interface for connecting to the bridges at Tampa and Orlando• the traditional WAN interface for connecting to the router at DallasCyberSWITCH systems do not require you to configure traditional WAN interfaces for IPXrouting, so no additional interface configuration is needed for the Dallas network. However, youmust configure both the LAN interface and the Remote LAN interface (for access to Tampa andOrlando). The configurations of both of these interfaces are described in the following sections.Add a LAN InterfaceFirst we will add the LAN interface. From the IPX Menu, select IPX Interfaces. Select Add. Select LANas the type of interface.The interface name is a symbolic name given to the interface. For the LAN interface, you shoulduse a name that describes the LAN. Enter detroitlan for this example.You will then be asked for the IPX external network number for the LAN interface. Enter 0100.For the rest of the prompts, press to accept the default values (including the default valuesfor the LAN RIP information).IPX Menu:1) IPX Routing (Enable/Disable)2) IPX Internal Network Number3) IPX Interfaces4) Routing Protocols(Enable/Disable)5) IPX Static Routes6) NetWare Static Services7) IPX Spoofing8) Type 20 Protocol9) Isolated Mode (Enable/Disable)10) Triggered RIP/SAPSelect function from above or for previous menu: