3. Press and hold the exit button located abovebuttons 1 and 2 on the driver’s door armrestfor at least three seconds.Two beeps will sound to confirm that the exitposition has been saved.4. Repeat the procedure for a second driver usingmemory seat button 2 or the RKE transmitter,that has the number 2 on the back of it.To recall the stored exit positions, press andrelease the exit button. One beep will sound, andthe seat will move to the stored exit positionfor that driver. If an exit position has not beenstored for this driver, the seat will move all the wayback. The position of the outside mirrors doesnot change for the exit position.If your vehicle has an automatic transmission, thevehicle must be in PARK (P) to recall the exitpositions. If your vehicle has a manual transmissionand the engine is running, the parking brake mustbe set to recall the stored exit positions.Three chimes will sound and the exit setting willnot be recalled if you press the exit buttonwhen the vehicle is not in PARK (P) on anautomatic transmission or the parking brake is notset on a manual transmission.If you would like your stored exit position to berecalled when unlocking the vehicle with the RKEtransmitter, or when the ignition is turned offand the driver’s door is opened, see DIC VehiclePersonalization on page 239.13
