Cadillac 2007 CTS Owner's Manual

Also see for 2007 CTS: Owner's manual

Contents

Programming Universal HomeRemote — Fixed CodeFixed Code garage door openers are used forgarage doors produced prior to 1996. Fixed codeuses the same coded signal every time, whichis manually programmed by setting DIP switchesfor a unique personal code.To program up to three channels,1. Remove the battery cover of the hand-heldtransmitter.2. Write down the eight to 12 coding switchsettings from left to right. When the switchis in the up position, write “on,” and when aswitch is in the down position, write “off”.If a switch is set between the up and downposition, write “middle”.3. Enter these positions into the Universal HomeRemote System as follows.Press and release all three buttons at the sametime to put the device into programming mode.Example of Switch Settings143