To program the vehicle to a different mode, usethe following procedure:1. Enter the personalization portion of theSETUP menu following the instructionslisted previously.2. Turn the TUNE/SEL knob until DELAYEDLOCKING is highlighted.3. Press the TUNE/SEL knob to switch back andforth between on and off.When the mode is turned on, a check markwill appear next to the feature name.The mode you selected is now set. You can eitherexit the programming mode by following theinstructions later in this section or program thenext feature available on your vehicle.Lock Passenger WindowThis feature allows you to disable either all thepassenger window switches or the rear passengerwindow switches only. If this feature is turnedon, all passenger window switches will be disabledwhen the window lockout button is pressed. Ifthe feature is off, only the rear passenger windowswitches will be disabled. See Power Windowson page 104 for more information.Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory,it was programmed to Mode 2. The mode towhich the vehicle was programmed may havebeen changed since it left the factory.255
