4. Pull the lamp assembly away from the vehicleto expose the bulb sockets.5. Turn the bulb socket one-quarter turncounterclockwise and pull the bulb and socketout of the lamp reflector.6. Pull the old bulb from the bulb socket keepingthe bulb straight as you pull it out.7. Install a new bulb.8. Reverse the steps to reinstall the lampassembly.Replacement BulbsExterior Lamp Bulb NumberBack-Up, Front/Rear Turn Signal,Stoplamp and Taillamp3157KFog Lamp 9145License Plate Lamp W5WLLRear Sidemarker Lamp W5WLLFor replacement bulbs not listed here, contactyour dealer.Windshield Wiper BladeReplacementWindshield wiper blades should be inspected forwear or cracking. See Owner Checks and Serviceson page 469.It is a good idea to clean or replace the wiperblade assembly on a regular basis or when worn.For proper windshield wiper blade length andtype, see Normal Maintenance Replacement Partson page 476.To replace the wiper blade assembly, do thefollowing:1. Turn the ignition to ON with the engine off.2. Turn on the windshield wipers and turn themoff again when the wipers are in the out-wipeposition. The driver’s side blade will bestraight up and down on the windshield.3. Pull the windshield wiper assembly away fromthe windshield.390
