3. When SETUP appears on the display, pressthe knob once to select it.4. Scroll through the SETUP menu by turningthe knob.5. When CONFIGURE SWC KEYS appears onthe display, press the knob once to select it.6. Scroll through the buttons (1, 2, 3 or 4). Pressthe knob to select the desired number.7. Choose a new function for the control byscrolling through the list of available functions.8. Once you have highlighted your choice, pressthe knob once to select it.The control you selected is now programmedwith the function you selected.9. Press the CLR (CLEAR) button to exit eachmenu. To program another control, repeat theprocedure.If your vehicle has the Navigation system, do thefollowing:1. Press the MAIN button located to the lowerleft of the display.2. Press the multi-function button next to theSetup prompt at the right of the display.3. Press the multi-function button next to ProgSWC located at the right of the screen.4. Turn the TUNE/SEL knob to scroll through theavailable functions.5. Once the function desired is highlighted, pressand hold the multi-function button next to thecontrol you want to program (1, 2, 3 or 4).The buttons are located at the right ofthe display.When a control is successfully programmed,the function you selected will appear nextto the number of the control at the right of thedisplay.6. Press the multi-function button next to theBack prompt to exit each menu. To programanother control, repeat the procedure.When a control is programmed with a function,that function cannot be used with any other control.It becomes available again only when anotherfunction is programmed to the control.162
