1. Open the trunk. See Trunk on page 100 formore information.2. Remove the compact spare tire cover byturning the wing nut counterclockwise.3. Remove the four convenience net wing nuts.4. Pull the carpet back away from the bodyof the vehicle on the side with the burnedout bulb.5. Remove the two mounting screws from thelamp assembly.6. Pull out the lamp assembly to expose the bulbsockets.7. Turn the bulb socket one-quarter turncounterclockwise and pull the bulb socketout of the lamp reflector.8. Pull the old bulb from the bulb socket keepingthe bulb straight as you pull it out.9. Install a new bulb.10. Reverse the steps to reinstall the lampassembly.Back-Up and License Plate LampsA. Back-Up LampsB. License Plate LampsTo replace a back-up or license plate bulb, do thefollowing:1. Open the trunk. See Trunk on page 100 formore information.2. Remove the cloth cover on the trunk lid bypulling out the three push-pins located onthe underside of the trunk lid.3. Remove the eight mounting nuts from theunderside of the trunk lid by turning thenuts counterclockwise.389
