To program the vehicle to a different mode, usethe following procedure:1. Enter the personalization portion of theSETUP menu following the instructionslisted previously.2. Turn the TUNE/SEL knob until HORNSOUNDS AT LOCK is highlighted.3. Press the TUNE/SEL knob to switch back andforth between on and off.When the mode is turned on, a check markwill appear next to the feature name.If you select this feature to be on, Lights Flash AtLock will also be on. You can choose LightsFlash At Lock by itself, but Horn Sounds At Lockwill always have Lights Flash At Lock enabledwhen it is selected.The mode you selected is now set. You can eitherexit the programming mode by following theinstructions later in this section or program thenext feature available on your vehicle.Exterior Lights at UnlockThis feature turns on the exterior lamps when theRemote Keyless Entry (RKE) transmitter isused to unlock the vehicle. The lamps will remainon for about 20 seconds unless a door isopened, the ignition is turned to ACCESSORY,ON, or START, or the RKE transmitter is used tolock the vehicle.Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory,it was programmed to Mode 1. The mode towhich the vehicle was programmed may havebeen changed since it left the factory.249
