To program the vehicle to a different mode, usethe following procedure:1. Enter the personalization portion of theSETUP menu following the instructionslisted previously.2. Turn the TUNE/SEL knob until REMOTE EXITRECALL is highlighted.3. Press the TUNE/SEL knob to switch back andforth between on and off.When the mode is turned on, a check markwill appear next to the feature name.If this feature is selected, Remote Recall Memorycannot be selected.The mode you selected is now set. You can eitherexit the programming mode by following theinstructions later in this section or program thenext feature available on your vehicle.Key in Recall MemoryIf your vehicle has the optional memory package,you will have this feature. When this feature isturned on, you can recall any previouslyprogrammed seat and mirror positions when thekey is inserted into the ignition.Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory,it was programmed to Mode 2. The mode towhich the vehicle was programmed may havebeen changed since it left the factory.243
