5. If your child restraint has a top tether,attach and tighten the top tether to thetop tether anchor. Refer to the instructionsthat came with the child restraint and tostep five under Lower Anchors and Tethersfor Children (LATCH) on page 55.6. Push and pull the child restraint in differentdirections to be sure it is secure.To remove the child restraint, just unbuckle thevehicle’s safety belt and let it go back all the way.The safety belt will move freely again and beready to work for an adult or larger childpassenger.Securing a Child Restraint in theRight Front Seat PositionYour vehicle has a right front passenger airbag.A rear seat is a safer place to secure aforward-facing child restraint. See Where toPut the Restraint on page 54.In addition, your vehicle has a passenger sensingsystem. The passenger sensing system isdesigned to turn off the right front passenger’sfrontal airbag when an infant in a rear-facing infantseat or a small child in a forward-facing childrestraint or booster seat is detected. SeePassenger Sensing System on page 79 andPassenger Airbag Status Indicator on page 194for more information on this including importantsafety information.63