2. Write down the eight to 12 switch settings from leftto right as follows:• When a switch is in the up position, write “Left.”• When a switch is in the down position,write “Right.”• If a switch is set between the up and downposition, write “Middle.”The switch settings written down in Step 2 willnow become the button strokes to be entered intothe Universal Home Remote in Step 4. Be sure toenter the switch settings written down in Step 2, inorder from left to right, into the Universal HomeRemote, when completing Step 4.3. From inside your vehicle, first firmly press all threebuttons at the same time for about three seconds.Release the buttons to put the Universal HomeRemote into programming mode.4. The indicator lights will blink slowly. Enter eachswitch setting from Step 2 into your vehicle’sUniversal Home Remote. You will have two andone-half minutes to complete Step 4. Now pressone button on the Universal Home Remote foreach switch setting as follows:• If you wrote “Left,” press the left button inthe vehicle.• If you wrote “Right,” press the right button inthe vehicle.• If you wrote “Middle,” press the middle button inthe vehicle.2-58
