5. Say a name tag for the phone number. The nametag is recorded and the system responds with“About to store . Does that sound OK?”.• If the name tag does not sound correct, say“No” and repeat Step 5.• If the name tag sounds correct, say “Yes” andthe name tag is stored. After the number isstored the system returns to the main menu.Using the Digit Store CommandThe digit store command allows a phone number to bestored by entering the digits individually.1. Press and hold b g for two seconds. The systemresponds with “Ready” followed by a tone.2. Say “Digit Store”. The system responds with“Please say the first digit to store” followed bya tone.3. Say the first digit to be stored. The system willrepeat back the digit it heard followed by a tone.Continue entering digits until the number to bestored is complete.• If an unwanted number is recognized by thesystem, say “Clear” at any time to clear thelast number.• To hear all of the numbers recognized by thesystem, say “Verify” at any time and thesystem will repeat them.4. After the complete number has been entered, say“Store”. The system responds with “Please say thename tag” followed by a tone.5. Say a name tag for the phone number. The nametag is recorded and the system responds with“About to store . Does that sound OK?”.• If the name tag does not sound correct, say“No” and repeat Step 5.• If the name tag sounds correct, say “Yes” andthe name tag is stored. After the number isstored the system returns to the main menu.Using the Directory CommandThe directory command lists all of the name tags storedby the system. To use the directory command:1. Press and hold b g for two seconds. The systemresponds with “Ready” followed by a tone.2. Say “Directory”. The system responds with“Directory” and then plays back all of the storedname tags. When the list is complete, the systemreturns to the main menu.3-120
