Back-Up LampsTo replace a back-up lamp bulb:1. Open the trunk. See Trunk on page 2-15.2. Pull out the push pins holding down the top portionof the cloth cover.3. Fold the cover down slightly and locate the lampassembly.4. Turn the socket counterclockwise and pull it straightout to remove it from the lamp assembly.5. Pull the old bulb straight out and reinstall thenew bulb.6. Put the cover back in place and reinstall thepush pins.Replacement BulbsExterior Lamp Bulb NumberBack-up 3157KFor replacement bulbs not listed here, contact yourdealer/retailer.Windshield ReplacementThe windshield is part of the Head-Up Display (HUD)system. If you ever have to get the windshield replaced,get one that is designed for HUD or the HUD imagemay look out of focus.Windshield Wiper BladeReplacementWindshield wiper blades should be inspected for wearor cracking. See Scheduled Maintenance on page 6-4.It’s a good idea to clean or replace the wiper bladeassembly on a regular basis or when worn. For properwindshield wiper blade length and type, see MaintenanceReplacement Parts on page 6-15.5-52
