The name or greeting you programmed is now set.You can either exit the programming mode by followingthe instructions later in this section or program thenext feature available on your vehicle by pressing theF6 (BACK) button, located on the radio, to return tothe PERSONAL SETTINGS MENU. You will now seea check mark next to the driver greeting menu item,which means that the driver greeting feature is onand a customized driver greeting is being used.To turn off the customized driver greeting, and go backto displaying either Driver 1 or Driver 2:1. Enter the PERSONAL SETTINGS MENU byfollowing the instructions listed previously under“Entering the Personal Settings Menu.”2. Turn the tune/select knob until DRIVER GREETINGis highlighted.3. Press the tune/select knob to turn on the DRIVERGREETING feature. The check mark will be clearedand the customized driver greeting is off.To change a customized driver greeting after exitingthe screen to spell the name, turn the driver greetingfeature off, and then back on.KEY FOB REMINDERThis feature sounds the horn three times when thedriver’s door is closed and there is a keyless accesstransmitter left inside of the vehicle. This will only occurwhen the vehicle is off.Programmable ModesMode 1: ON (default)Mode 2: OFFTo program the vehicle to a different mode:1. Enter the PERSONAL SETTINGS MENU byfollowing the instructions listed previously under“Entering the Personal Settings Menu.”2. Turn the tune/select knob until KEY FOBREMINDER is highlighted.3. Press the tune/select knob to switch back and forthbetween on and off.When the mode is turned on, a check mark willappear next to the feature name.The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.2-64
