Disabling and Resetting IntelliBeam at theRearview MirrorIntelliBeam can be disabled and reset to the originalfactory setting by using the controls on the insiderearview mirror.AUTO 3 (IntelliBeam On/Off): To disable thesystem, press this button on the inside rearview mirror.The IntelliBeam indicator turns off and does not comeback on until the IntelliBeam button is pressed again.When IntelliBeam has turned on the high-beams, pull orpush the high-beam stalk. This disables IntelliBeam andthe IntelliBeam indicator on the rearview mirror turns off.To re-enable IntelliBeam, press the IntelliBeam button onthe mirror.A different sensitivity setting is available for dealerdiagnostics. This is done by pushing and holding thisbutton for 20 seconds until the light flashes three times.If you accidentally activate this, the vehicle’s settingautomatically resets each time the ignition is turned offand then on again; otherwise, refer to the text above forresetting the system.Cleaning the IntelliBeam Light SensorThe light sensor is locatedon the inside of the vehicleat the back of therearview mirror.Clean the light sensor window, periodically, using glasscleaner on a soft cloth. Gently wipe the sensor window.Do not spray glass cleaner directly on the surface of thesensor window.3-35
