10-28 Vehicle CarePark on a fairly steep hill, with thevehicle facing downhill. Keepingyour foot on the regular brake, setthe parking brake.. To check the parking brake'sholding ability: With the enginerunning and the transmission inN (Neutral), slowly remove footpressure from the regular brakepedal. Do this until the vehicle isheld by the parking brake only.. To check the P (Park)mechanism's holding ability:With the engine running, shift toP (Park). Then release theparking brake followed by theregular brake.Contact your dealer if service isrequired.Wiper Blade ReplacementWindshield wiper blades should beinspected for wear or cracking. SeeMaintenance Schedule onpage 11‑3.Replacement blades come indifferent types and are removed indifferent ways.To replace the wiper bladeassembly:1. Pull the windshield wiper armconnector away from thewindshield.2. Squeeze the grooved areas oneach side of the blade, androtate the blade assembly awayfrom the arm connector.3. Install the new blade onto thearm connector and make surethe grooved areas are fully set inthe locked position.For the proper type and size, seeMaintenance Replacement Parts onpage 11‑14.Glass ReplacementIf the windshield or front side glassmust be replaced, see your dealerto determine the correctreplacement glass.
