1-9Laws in some local communities mayrestrict the use of remote starters.For example, some laws may requirea person using remote start to havethe vehicle in view. Check localregulations for any requirements.There are other conditions which canaffect the performance of thetransmitter, see Remote KeylessEntry (RKE) System on page 1-3 foradditional information.Starting the Engine Using RemoteStartTo start the engine using the remotestart feature:1. Press Q on the RKE transmitter.2. Within three seconds, press andhold / until the turn signal lampsflash. This confirms the requestto remote start the vehicle hasbeen received. If the vehicle' slamps are not visible, press andhold / for at least two seconds.During the remote start thevehicle's doors will be locked andthe parking lamps will remain onas long as the engine is running.3. Press the brake pedal and selectthe ON/RUN/START ignitionmode to drive the vehicle.The engine will shut off after 10minutes unless a time extensionis done or the ignition is put inON/RUN/START.Extending Engine Run TimeFor a 10 minute extension, repeatSteps 1 and 2 while the engine is stillrunning. The remote start can onlybe extended once.When the remote start is extended,the second 10 minute period will startimmediately.For example, if the vehicle has beenrunning for five minutes, and 10minutes are added, the engine willrun for a total of 15 minutes.A maximum of two remote starts orremote start attempts are allowedbetween ignition cycles.The vehicle's ignition must bechanged to ON/RUN/START andthen back to OFF before the remotestart procedure can be used again.Shutting the Engine Off After aRemote StartTo cancel a remote start:• Press / until the parking lampsturn off.• Turn on the hazard warningflashers.• Turn the ignition on and then backoff.srx.book Page 9 Monday, June 8, 2009 8:28 AM
