9-375. Install the bulb socket in theheadlamp assembly.6. Connect the electrical connector.7. Install the cap with the downarrow pointing down in the backof the headlamp assembly.8. For driver side, reinstall theunderhood electrical center coverby latching three clips.9. For passenger side, reinstall theair filter/cleaner assembly baseby pushing to seat . Verify thebase is seated securely, theninstall the engine air filter/cleanerassembly.Front Turn Signal Lamp (Baseand Up-Level)To replace the Front Turn SignalLamp:1. Remove the turn signal lamp bulbsocket from the headlampassembly.2. Remove the turn signal lamp bulbfrom the socket.3. Replace the bulb in the bulbsocket.4. Install the bulb socket in theheadlamp assembly.5. For driver side, reinstall theunderhood electrical center coverby latching three clips.6. For passenger side, reinstall theair filter/cleaner assembly baseby pushing to seat . Verify thebase is seated securely, theninstall the engine air filter/cleanerassembly.Turn Signal LampsTo replace one of these bulbs:1. Open the liftgate. See Liftgate(Manual) on page 1-12 andLiftgate (Power) on page 1-13 formore information.A. Push PinB. Taillamp Cover2. Pull on push pin (A) to releasethe taillamp cover (B).srx.book Page 37 Monday, June 8, 2009 8:28 AM
