2-5Adjust the power seat by moving thecontrol (A) forward or rearward. Thefront or rear of the seat can beadjusted up or down by moving thefront or rear of the control up anddown.Adjust the seatback by moving thecontrol (B) forward or rearward.Adjust the lumbar support by usingthe control (C). See LumbarAdjustment on page 2-6 for moreinformation.Memory SeatsThe vehicle may have a memoryseat allowing saved and recalledseat settings. Controls are located onthe outboard side of the seat.To save:1. Adjust the driver seat, includingthe seatback recliner, bothoutside mirrors, and pedals, ifavailable.2. Press and hold the MEM buttonand button 1 at the same time.One beep indicates the positionis stored.Repeat for a second memory settingwhile pressing button 2.To recall the memory positions, pressand hold either button 1 or button 2corresponding to the desired drivingposition. The seat, outside mirrorsand pedals, if available, move to thestored position . Releasing the buttonbefore the stored position is reachedcancels the recall.Entering the vehicle using theRemote Keyless Entry (RKE)transmitter with the remote recallfeature activated in VehiclePersonalization automatically adjuststhe seat, mirrors and pedals, ifavailable. There is no adjustmentwhen the position has not beenchanged by another seating position.When the remote recall feature is on,the seat, mirror and pedal position, ifavailable, will be stored when theignition is turned to OFF. It is storedaccording to the RKE transmitterused to start the vehicle.srx.book Page 5 Monday, June 8, 2009 8:28 AM
