2-52{ WARNINGDo not attach more than one childrestraint to a single anchor.Attaching more than one childrestraint to a single anchor couldcause the anchor or attachment tocome loose or even break duringa crash. A child or others could beinjured. To reduce the risk ofserious or fatal injuries during acrash, attach only one childrestraint per anchor.Notice: Do not let the LATCHattachments rub against thevehicle’s safety belts. This maydamage these parts. If necessary,move buckled safety belts to avoidrubbing the LATCH attachments.Do not fold the empty rear seatwith a safety belt buckled. Thiscould damage the safety belt orthe seat. Unbuckle and return thesafety belt to its stowed position,before folding the seat.{ WARNINGChildren can be seriously injuredor strangled if a shoulder belt iswrapped around their neck andthe safety belt continues totighten. Buckle any unused safetybelts behind the child restraint sochildren cannot reach them. Pullthe shoulder belt all the way out ofthe retractor to set the lock, if yourvehicle has one, after the childrestraint has been installed.Make sure to attach the childrestraint at the proper anchorlocation.This system is designed to makeinstallation of child restraints easier.When using lower anchors, do notuse the vehicle's safety belts. Insteaduse the vehicle's anchors and childrestraint attachments to secure therestraints. Some restraints also useanother vehicle anchor to secure atop tether.1. Attach and tighten the lowerattachments to the loweranchors. If the child restraintdoes not have lower attachmentsor the desired seating positiondoes not have lower anchors,secure the child restraint with thetop tether and the safety belts.Refer to your child restraintmanufacturer instructions and theinstructions in this manual.1.1 Find the lower anchors forthe desired seating position.1.2 Put the child restraint on theseat.srx.book Page 52 Monday, June 8, 2009 8:28 AM
