1-25Programming the PowerWindowsProgramming the power windowsmay be necessary if the vehicle'sbattery has been disconnected ordischargedIf the window will not express upafter power has been restored and amessage is displayed in the DriverInformation Center:1. Close all doors2. Place the ignition inACC/ACCESSORY orON/RUN/START.3. From any partial open position,close the window and continue topress the switch briefly after thewindow has fully closed.Obstacle Detection FeatureThe Obstacle Detection Feature ispart of the express-up feature and isactive:1. In the middle and upper portionsof the window opening.2. During window up movements.3. In ignition OFF during all windowup movements and duringexpress-up window movementsin ignition ON/RUN/START.If there is something blocking thewindow during automatic closing, thewindow will reverse direction for ashort distance. Weather conditionssuch as extreme cold and/or ice maycause the window to auto-reverse.The window will return to normaloperation once the object orcondition is removed.If conditions prevent the window fromclosing and the window continues toauto-reverse, it is possible to closethe window with the ignition inON/RUN/START by holding thewindow switch in the partially or fullypulled up position. Release of theswitch from the partially pulled upposition will cause the window tostop. Release of the switch from thefully pulled up position will activatethe express-up and related obstacledetection features.OverloadIf the windows are repeatedlyoperated within a short time, thewindow operation is disabled for ashort time.srx.book Page 25 Monday, June 8, 2009 8:28 AM
