6-14 Chapter 6Sending DocumentsJ Although direct sending is slower than memory sending, you can use directsending when you need to send an urgent document ahead of otherdocuments stored in the memory.J You can also use direct sending when the memory is full and there is no spaceto hold another document in memory.1. Set the document on the fax. (Q6-3)Set the document resolution, contrast, and document type. (Q6-4)You can also select a sender’s name with the TTI SELECTOR. (Q6-6)DIRECT TX2. Press DIRECT TX.The DIRECT TX lamp lights. The fax is now in the direct sending mode.3. Dial the other party’s fax number.1472580369ABCGHIPQRSJKLTUVMNOWXYZDEF Use the buttons on the numeric keypad to dial the number. (Q6-7)-or-Press a One-touch Speed Dialling button to dial the number. (Q4-26)-or-Press CODED DIAL and a three-digit code to dial the number. (Q4-28)-or-Press DIRECTORY and search for the name to dial the number. (Q4-31)If you make a mistake during dialling, press STOP to return to standby andstart again.4. Press START/SCAN.The fax dials the other party’s number and sends the fax. Each page is sent asit is scanned.A series of messages report the other party’s name, telephone number, andtransaction number in the LCD display. The final message reports successfultransmission.26/12 ’97 FRI 12:05TRANSMITTING OKDIRECT TX5. Press DIRECT TX to turn off the direct sending mode.
